[HamWAN PSDR] optimization first results

[Bart Kus]

No, you're missing an entire chain of the radio (ch1).  Do this to 
enable both chains:

/interface wireless set 0 rx-chains=0,1 tx-chains=0,1

--Bart


On 11/1/2019 2:55 PM, Ric Merry wrote:
> I climbed back up the ladder to do some fine tuning (thanks for the 
> advice here)
> Luckily I could remotely view my computer with my cell phone thus 
> saving me the cost of a divorce attorney had I asked my wife to help 
> me when she gets home from work.
> ;)
> These are my results, I can do more but for now, how do they look?
>
> signal-strength: -66dBm
>      signal-strength-ch0: -66dBm
>       tx-signal-strength: -67dBm
>   tx-signal-strength-ch0: -67dBm
>   tx-signal-strength-ch1: -89dBm
>              noise-floor: -123dBm
>          signal-to-noise: 57dB
>                   tx-ccq: 88%
>                   rx-ccq: 70%
>    authenticated-clients: 1
>         current-distance: 32
>
> Funny things is that thee are about where I started. Elevation is the 
> more difficult adjustment with the brackets provided. I may end up 
> modifying those.
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191101/634d9bab/attachment.html>