[HamWAN PSDR] One node network for testing?

[Nigel Vander Houwen]

Kun,

Effectively yes, you would need to set a fixed frequency and channel width for the AP side, the clients are configured to scan over the HamWAN scan list. Then set the mode to ap-bridge instead of station.

There’s a fair bit more that goes into all the backend routing with the rest of the network, but as far as a test setup and getting something a client could connect to, it’s fairly straightforward.

Nigel

> On Sep 5, 2019, at 11:14, KUN LIN <dnwk at linkun.info> wrote:
> 
> Hi
> I am currently not in your coverage. However, I want to have some understanding of the system engineering. I am thinking about setting up one “provider/cell” site in my backyard. I can’t find any details on how to do that. Any information would be appreciated. For those hardware listed in “client hardware”, could they be tuned to providing service?
> Thanks
> Kun
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org <mailto:PSDR at hamwan.org>
> http://mail.hamwan.net/mailman/listinfo/psdr <http://mail.hamwan.net/mailman/listinfo/psdr>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190905/aef82a7c/attachment.html>