[HamWAN PSDR] Anyone have (access to) a high quality pipe bender?

[Jeff Francis™]

  My dad used to use the old trick of filling the pipe with sand before
bending.  Keeps it from crimping (though I'm not sure that's the problem
you're having).  I'm afraid I have no bender, nor the experience to use one
if I did.


On Thu, Jun 27, 2013 at 10:26 AM, Bart Kus <me at bartk.us> wrote:

> Hi,
>
> These pipe bends for the Baldi mounts are not turning out great. Need
> something to bend 2-3/8" (OD) tubing with 90 deg angles and leave it
> looking pretty.  The harbor freight bender for this is not the right
> design.  A design like these seems a lot more appropriate:
>
> http://www.probender.com/
>
> where it pulls the tube through and around the bend.  Horizontally
> oriented gear like that would also work.
>
> Any suggestions?
>
> --Bart
>
>
> ______________________________**_________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.org/**mailman/listinfo/psdr_hamwan.**org<http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org>
>



-- 
-=jeff=-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20130627/9bc43964/attachment.html>