[HamWAN PSDR] Switch to 10 MHz channel plan ACTION REQUIRED

[Tom Hayward]

On Sat, Aug 9, 2014 at 12:16 PM, Dean Gibson AE7Q <hamwan.stuff at ae7q.com> wrote:
> An FYI:
>
> It turns out that you can specify multiple scan-lists (and/or channel names)
> in the "/interface wireless set wlan1-gateway scan-list=..." command (but
> apparently not in the individual channel declarations).  So, here's what I
> use:
>
> /interface wireless
> channels remove [find]
> channels add band=5ghz-onlyn width=5  frequency=5920 list=HamWAN-360-all
> name=HamWAN-360-old   comment="Sector 1/360 (300-060)"
> channels add band=5ghz-onlyn width=5  frequency=5905 list=HamWAN-120-all
> name=HamWAN-120-old   comment="Sector 2/120 (060-180)"
> channels add band=5ghz-onlyn width=5  frequency=5890 list=HamWAN-240-all
> name=HamWAN-240-old   comment="Sector 3/240 (180-300)"
> channels add band=5ghz-onlyn width=5  frequency=5920 list=HamWAN-360-all
> name=HamWAN-360-5MHz  comment="Sector 1/360 (300-060)"
> channels add band=5ghz-onlyn width=5  frequency=5900 list=HamWAN-120-all
> name=HamWAN-120-5MHz  comment="Sector 2/120 (060-180)"
> channels add band=5ghz-onlyn width=5  frequency=5880 list=HamWAN-240-all
> name=HamWAN-240-5MHz  comment="Sector 3/240 (180-300)"
> channels add band=5ghz-onlyn width=10 frequency=5920 list=HamWAN-360-all
> name=HamWAN-360-10MHz comment="Sector 1/360 (300-060)"
> channels add band=5ghz-onlyn width=10 frequency=5900 list=HamWAN-120-all
> name=HamWAN-120-10MHz comment="Sector 2/120 (060-180)"
> channels add band=5ghz-onlyn width=10 frequency=5880 list=HamWAN-240-all
> name=HamWAN-240-10MHz comment="Sector 3/240 (180-300)"
> set wlan1-gateway band=5ghz-onlyn wireless-protocol=nv2
> frequency-mode=superchannel ssid=HamWAN radio-name="AE7Q/MillCreek-Paine"
>
> To scan everything:
>
> /interface wireless set wlan1-gateway
> scan-list=HamWAN-120-all,HamWAN-240-all,HamWAN-360-all
>
> To scan just my sector:
>
> /interface wireless set wlan1-gateway scan-list=HamWAN-120-all
>
> To scan just one channel:
>
> /interface wireless set wlan1-gateway scan-list=HamWAN-120-5MHz

Dean,

Thanks. I like this technique.

Tom