[HamWAN PSDR] KU7M testing results - Newcastle Golf Course
Kenny Richards
richark at gmail.com
Fri Mar 7 13:00:30 PST 2014
Since the weather decided to not suck this morning, I did a quick 'site
survey' from the Newcastle Golf Course parking lot. (N 47.53602, W
122.14272 @ 919 feet)
I have attempted to get connected from my house several times, but haven't
had any success. Before going back up on the tower, I wanted to try
connecting from what I expected to be a REALLY good location. I'm only
about a mile as the crow flies the Newcastle Golf course, so it is my go to
place for this kind of thing.(I'm about 500 feet lower though) From the
edge of the golf course parking lot you can see all of downtown, right over
the top of Mercer Island. (See attached picture)
So I had expected to connect to the PtP link at Capital Park without any
problems, since I can SEE the damn building from up there. But nope, still
no luck. I was able to see two other sites and associate with them. I knew
there was a node going up on Haystack, but I was surprised how easy it was
to connect to it. What I really don't get is how I was seeing AE7SJ's home
link. Isn't it pointed at DEM? (Or is AE7SJ something else?)
I also discovered something else that confuses me. I saw thayward@ use the
LED signal indicators on the radio a couple weeks ago. But this afternoon,
I never got even one bar. Do you have to enable them before they work?
(I'll have to dig into the docs on this one) I would assume at least one
bar would light up with these signal strengths, right?
So my next step is taking a trip downtown with the portable setup and see
if I can find a spot semi-close to Capital Park and try to connect. My gut
is telling me that something is fundamentally wrong with the PtP link or
how I have things setup on my end. The golf course isn't 'exactly' in
between downtown and the Cougar Mnt site, but it is really close. So if
this link is going to work as it was intended, I should have been able to
connect from up there.
I also attached the config dump from the radio.
Thoughts?
Kenny
Output from Scan...
Flags: A - active, P - privacy, R - routeros-network, N - nstreme, T -
tdma, W - wds, B - bridge
ADDRESS SSID BAND CHANNEL-WIDTH FREQ
SIG NF SNR RADIO-NAME
A RT D4:CA:6D:62:D7:ED HamWAN 5ghz-n 5mhz 5890
-88 -117 29 Haystack-S3/AE7SJ
APRT 00:0C:42:E0:4F:AC HamWAN 5ghz-n 10mhz 5475
-87 -117 30 AE7SJ
[image: Inline image 1]
[image: Inline image 3]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20140307/79d9e23a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CaptParktoNewcastleGolfShot.png
Type: image/png
Size: 504099 bytes
Desc: not available
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20140307/79d9e23a/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DownTownfromGolfCourse.JPG
Type: image/jpeg
Size: 1914396 bytes
Desc: not available
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20140307/79d9e23a/attachment.jpe>
-------------- next part --------------
[admin at KU7M-CapitolPark] > /export compact
# jan/02/1970 00:05:32 by RouterOS 6.2
# software id = Z1K5-KELC
#
/interface wireless
set 0 band=5ghz-a/n channel-width=20/40mhz-ht-above disabled=no frequency=5300 frequency-mode=superchannel l2mtu=2290 name=wlan1-gateway radio
scan-list=HamWAN ssid=HamWAN wireless-protocol=nv2
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5905 list=HamWAN name=Sector2 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5890 list=HamWAN name=Sector3 width=5
add band=5ghz-onlyn comment=CapitolPark-Cougar frequency=5475 list=HamWAN name=Sector4 width=10
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m mac-cookie-timeout=3d
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
/ip address
add address=192.168.168.1/24 interface=ether1-local network=192.168.168.0
/ip dhcp-client
add comment="default configuration" dhcp-options=hostname,clientid disabled=no interface=wlan1-gateway
add add-default-route=no dhcp-options=hostname,clientid disabled=no interface=ether1-local use-peer-dns=no
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" out-interface=wlan1-gateway to-addresses=0.0.0.0
/ip service
set api disabled=yes
/system identity
set name=KU7M-CapitolPark
/system leds
set 0 interface=wlan1-gateway
set 1 interface=ether1-local
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether1-local
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether1-local
[admin at KU7M-CapitolPark] >
More information about the PSDR
mailing list