[HamWAN PSDR] Paine routing was broken, is fixed now

[Kyle Burgess]

Sorry about that.  I accidentally applied the wrong settings to the Metal
when configuring it yesterday.  It caused me to lose connection to the
Metal and obviously created more of a problem than I was aware of.  After
doing a factory reset and re-following the client install directions, I
then got it to connect properly.

FYI..  Some of the client install directions could use some tweaking as
they may be misleading for some.  The NTP synchronization step should
probably be pushed farther to the end of the directions (after connecting
to the network).  Also, when configuring the local DHCP server, step 2
needs to define the network address, not the local ethernet address (i.e.
192.168.88.0/24, not 192.168.88.1/24 like it shows).

Regards,

Kyle

On Sun, Feb 22, 2015 at 11:32 AM, Bart Kus <me at bartk.us> wrote:

> Hello KD7IYT and AE7Q,
>
> We had a sector router misconfigured at the Paine site.  When KD7IYT
> joined the network, it tried to route default gateway out his LAN (it
> pulled DHCP, which it should never do).
>
> The situation's been fixed now.
>
> --Bart
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20150222/f00e0cce/attachment.html>