[HamWAN PSDR] VOTE: NetMetal 5 replacement modem for ETiger

[David Giuliani]

Hi PSDR team - I don’t know if this is a good way to communicate with you guys, since I’m new to the group.  I just installed a HamWAN setup at my QTH at the north end of Mercer Island.  The directions on the website worked very well (just one work around requiring me to remove the existing dhcp client before adding the new one, but that was within my skill set.)

System works great.  My SNR is about 30dB, so I’m not getting full data rates, but enough to be serviceable.  I need to tune the antenna positioning to see if I can improve it.  

Thanks to your hard work for developing what’s already a highly capable system.  We’re in the process of integrating our somewhat extensive WINLINK/WINMOR capabilities on Mercer Island to include HamWAN.  So any advice & suggestions will be very welcome.
 


David WA6PXX, MIRO Digital Systems
cell: 206-465-6852

> On Mar 29, 2016, at 12:27 PM, Bart Kus <me at bartk.us> wrote:
> 
> Hello,
> 
> We have ETiger->SnoDEM modem die over the winter.  I suspect water ingress into the PCB, but it's hard to tell.  We can go replace it on Wednesday next week by the looks of it.
> 
> So we need 1 RB921UAGS-5SHPacD-NM modem which comes to $153.20 shipped from Streakwave.
> 
> My vote is Yay.
> 
> --Bart
> 
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20160329/f8e77ecc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-3.tiff
Type: image/tiff
Size: 7092 bytes
Desc: not available
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20160329/f8e77ecc/attachment.tiff>