[HamWAN PSDR] Trying to set up a new connection

[Dave Stewart]

Hello -- I'm trying to set up a connection, using the instructions here:

http://hamwan.org/Standards/Network%20Engineering/Client%20Node%20Configuration.html

I'm getting all the way to the point where I try to do a tracert ("Connect"
step 3), but nothing is coming through.

My monitor shows the following -- any ideas what I should do next?  Am I
just not hitting the Gold Mountain node well enough?

[admin at K7XST-Gold] > /interface wireless monitor 0

                  status: connected-to-ess

                 channel: 5900/5/an

       wireless-protocol: nv2

                 tx-rate: 14.4Mbps-5MHz/2S/SGI

                 rx-rate: 1.6Mbps-5MHz/1S

                    ssid: HamWAN

                   bssid: E4:8D:8C:F1:6D:22

              radio-name: Gold-S2/K7WAN

         signal-strength: -76dBm

     signal-strength-ch0: -78dBm

     signal-strength-ch1: -80dBm

      tx-signal-strength: -71dBm

  tx-signal-strength-ch0: -73dBm

  tx-signal-strength-ch1: -75dBm

             noise-floor: -107dBm

         signal-to-noise: 31dB

                  tx-ccq: 54%

                  rx-ccq: 6%

   authenticated-clients: 1

        current-distance: 33

                wds-link: no

                  bridge: no

        routeros-version: 6.36

                 last-ip: 44.24.240.97

     notify-external-fdb: no
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20170602/ee854511/attachment-0001.html>