[HamWAN PSDR] HamWAN client testing
Doug Kingston
dpk at randomnotes.org
Sat Aug 11 16:22:28 PDT 2018
My guess is Capitol Park.
-Doug-
On Sat, Aug 11, 2018 at 4:09 PM, Kyle Burgess <kd7iyt at gmail.com> wrote:
> Thanks, Tom. I'll keep that in mind for the next go-around. Here is the
> MAC we were using during the test: 4C:5E:0C:31:C4:43
>
> It was acting like we were making a connection to the Westin, based on the
> coordinates that were dialed in. I really wasn't expecting anything from
> that direction. However, it would be cool to verify if it truly was the
> Westin that we were passing traffic through. The best RSSI we saw was
> right around 75.
>
> Kyle
>
> On Sat, Aug 11, 2018 at 3:11 PM Tom Hayward <tom at tomh.us> wrote:
>
>> On Sat, Aug 11, 2018 at 1:27 PM B.J. Guillot <bj.guillot at gmail.com>
>> wrote:
>> > For grins, he tried the Seattle sectors (~40 km? away), and we got a
>> weak connection. We weren't sure exactly which sector we were hitting (he
>> said there are two it could have been)
>>
>> It's pretty simple to see which sector you are connected to. Just issue
>> this command:
>>
>> /interface wireless monitor 0
>> status: connected-to-ess
>> channel: 5900/5/an
>> wireless-protocol: nv2
>> tx-rate: 16.2Mbps-5MHz/1S
>> rx-rate: 16.2Mbps-5MHz/1S
>> ssid: HamWAN
>> bssid: E4:8D:8C:F1:6D:22
>> radio-name: Gold-S2/K7WAN
>> signal-strength: -57dBm
>> signal-strength-ch0: -57dBm
>> tx-signal-strength: -59dBm
>> tx-signal-strength-ch0: -59dBm
>> tx-signal-strength-ch1: -75dBm
>> noise-floor: -120dBm
>> signal-to-noise: 63dB
>> tx-ccq: 93%
>> rx-ccq: 93%
>> authenticated-clients: 1
>> current-distance: 10
>> wds-link: no
>> bridge: no
>> routeros-version: 6.41.3
>> last-ip: 169.48.173.167
>> current-tx-powers: 6Mbps:31(25/31),9Mbps:31(25/
>> 31),12Mbps:31(25/31),18Mbps:31(25/31),24Mbps:31(25/31),
>> 36Mbps:29(23/29),48Mbps:29(23/29),54Mbps:27(21/27),HT20-0:
>> 29(23/29),HT20-1:29(23/29),HT20-2:29(23/29),
>> HT20-3:29(23/29),HT20-4:29(23/
>> 29),HT20-5:27(21/27),HT20-6:27(21/27),HT20-7:26(20/26)
>> notify-external-fdb: no
>>
>> You can see the radio name right there next to the signal strength.
>>
>> If you can tell me your MAC, I can look you up in the logs to see what
>> sector you connected to.
>>
>> Tom KD7LXL
>> _______________________________________________
>> PSDR mailing list
>> PSDR at hamwan.org
>> http://mail.hamwan.net/mailman/listinfo/psdr
>>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20180811/713cc6ab/attachment.html>
More information about the PSDR
mailing list