[HamWAN PSDR] Larch Mnt [N7DOD]

[Scott J. Burrows]

Today, I was able to connect my RB911G-5HPacD (Node-2) to the Larch Mnt site.  
I setup the portable modem at the PUD Operation Center at 8600 NE 117th Avenue, 
Vancouver, Washington.  Here are the connection details:

channel: 5880/5/an
wireless-protolcol: nv2
tx-rate: 1.62Mbps-5MHz/15
ssid: HamWAN
radio-name:S3.Larch/K7WAN
signal-strength: -85dBm
noise-floor: -10dBm
current-distance: 21
last-ip: 44.24.244.1

I was able to connect, verify Internet using HamWAN, verify DNS, and verify NTP 
synchronization.  It started to rain heavy, so the fun was ended early than 
expected.


However, the RBLHGG-5acD (Node-1) would not locate any sector modems.  I 
verified it was the International version and updated to lastest software and 
firmware.  But did notice the WiFi Interfaces reported multiple unsupported 
channels and the following: 



  -- in scan-list does not contain valid channels

  -- empty scanlist

Does anyone know what is causing this problem?  If so, what is the fix.

---
New Outlook Express and Windows Live Mail replacement - get it here:
https://www.oeclassic.com/

 

Thanks

Scott, N7DOD
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20180826/77e18f20/attachment.html>