[HamWAN PSDR] Need advice.

[Stephen McLaughlin]

Mark,

I have found that running this command instead works to resolve the issue

/interface wireless
set 0 disabled=no frequency-mode=superchannel band=5ghz-onlyn
mode=station scan-list="HamWAN" ssid=HamWAN wireless-protocol=nv2


Note the quotes around the scan-list value. Alternatively setting the
scan-list value in winbox usually works.

On Wed, Jan 24, 2018 at 11:50 AM, Mark Tellez <mark.tellez at gmail.com> wrote:

> Hello,
>
> I am trying to get a Hamwan node setup and I have run into an issue that I
> can't seem to solve.
>
> I have followed the directions step by step but when I get to the final
> stage and go to connect I get a problem with there being no frequencies in
> the scanlist.
>
> I have heard this may be a know bug.   I was hoping that someone might be
> able to provide a documented work around.
>
> Thanks,
>
> Mark
>
>
>
> On Sun, Jan 7, 2018 at 10:07 PM, Mark Tellez <mark.tellez at gmail.com>
> wrote:
>
>>   Hello,
>>
>> I am wanting to get some advice on the equipment I need to get onto
>> Hamwan.  I have read the information on the website and attended a
>> presentation back in the fall to the Seattle ACS group. It was my
>> understanding that some of the suggestions on the list were no longer
>> current or available.  I am considering the LHG 5 antenna but the cost
>> on the website is about 3 times the cost noted on the HamWan site so....Suggestions?
>> Thoughts?
>>
>> Mark
>>
>>
>>
>>
>>
>> ------------------------------
>>
>> [*NOTE*:  This E-Mail message is for the sole use of the intended
>> recipient(s) and may contain FOUO, confidential and privileged information.
>> Any unauthorized review, use, disclosure or distribution is PROHIBITED. If
>> you are not the intended recipient, please contact the sender by reply
>> e-mail and DESTROY all copies of the original message.]
>>
>>
>
>
> --
>
> _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
> *Mark Tellez*
> mark.tellez at gmail.com
>
> _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
> ------------------------------
>
> [*NOTE*:  This E-Mail message is for the sole use of the intended
> recipient(s) and may contain FOUO, confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is PROHIBITED. If
> you are not the intended recipient, please contact the sender by reply
> e-mail and DESTROY all copies of the original message.]
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20180124/c972ebf4/attachment.html>