[HamWAN PSDR] WinBox V3.18 will not log in to two new BaseBox 5 Intl V6.18.
Dylan Ambauen
dylan at ambauen.com
Sun Nov 4 19:51:52 PST 2018
Sounds frustrating. Last time I did a hardware reset for the BaseBox5, the
instructions seemed kinda vague. And, if you hold the reset button down too
short or too long, you'll go into a different hardware mode. And after
reset, I could _only_ reconnect with winbox, IIRC there was no ip interface
enabled/configured.
Don't worry, the hardware is probably not ruined, and if it is, it is
probably not your fault. Try double-checking hardware reset instructions
again, make sure you're doing it right. I think I tried resetting about 10
times before getting it right.
---
Dylan Ambauen
KI7SBI
On Fri, Nov 2, 2018 at 9:51 AM David Haworth via PSDR <psdr at hamwan.org>
wrote:
> WinBox V3.18 will not log in to two new BaseBox 5 Intl V6.18.
> Login: admin
> Password:
> WinBox hangs with message
> Logging in...
>
> I have reset one of the BaseBox 5 Intl with no results.
> I have tried WinBox V3.18, V3.17, V3.16, V3.15, V3.14 and V3.13.
> BaseBox 5 is connected to an antenna.
>
> Using Dell Windows 8.1 laptop with CAT 6A cable connected directly to
> BaseBox 5.
> No router or hub is being used.
> Using MAC or IP Address 192.168.88.1 has no affect.
> Board info form WinBox: RB912UAG-5HPnD
>
> IE will not connect to http://192.168.88.1
>
> Both BaseBox 5 make a short funny sound before making the one beep, long
> delay, two beeps.
> The beeps are similar to the QRT 5 power on.
> The QRT 5 does not make the short funny sound.
>
> The Dell works fine with a QRT 5 Intl.
> http://www.stargazing.net/david/sdr/HamWAN.html#P2a
>
> What do you recommend to try next to get WinBox to work with the two
> BaseBox 5.
>
> Best Regards
> David Haworth, WA9ONY
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20181104/441f8740/attachment.html>
More information about the PSDR
mailing list