[HamWAN PSDR] Mikrotik DynaDish 5 + Beacon Hill

[Jake Visser]

Hi all,

So I just moved into a new place on Beacon Hill and looking setup a link to Hamwan. I have clear LOS to Beacon Hill apartments from my radio tower, where it looks like there might be some sectors… so 2 questions:


  1.  Are the sectors on Beacon Hill live? – the website indicates they might be under construction?
  2.  Mikrotik DynaDish 5 – its on the recommended hardware list (and would be my preference), but the spec sheet says it tops out at 5875MHz; while the config on the website shows use up to 5920 (with the lowest being 5880). So… datasheet wrong by chance? Or should I just be looking at using something else.

I have a hytera rd622i here that will probably be my next project.. so hoping to get it up online and use HamWAN as a backup link to PNW Digital’s servers [also have my own peering and a few other things here that I am happy to contribute to the cause if its wanted/needed - https://bgp.he.net/AS396388].

Thanks in advance,

Jake
KJ7IKM


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190823/23849dae/attachment.html>