[HamWAN PSDR] Client optimizing

[Bart Kus]

These instructions are bad.  Alignment should be done with "monitor" 
command, not "scan" command, since scan caches and presents old data, 
whereas monitor tracks real-time.

--Bart

On 11/1/2019 11:42 AM, Ric Merry wrote:
> I've ran these scripts a few times and let #1 run for a couple minutes 
> but took no other action (eg " Optimize for best signal"). Is this all 
> there is to optimizing? Am I done?
> Also, I was surprised to see another update available so soon.
>
> 1.
>
>     Point your dish at any cell sites
>     <https://hamwan.org/Puget%20Sound%20Data%20Ring/Sites.html> and
>     look for beacons. Optimize for best signal.
>
>     |/interface wireless scan 0|
> 2.
>
>     When signal is optimized, stop scanning and verify you have an
>     association with the cell site
>
>     |/interface wireless monitor 0|
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191101/1b72a36d/attachment.html>