[HamWAN PSDR] optimization first results
Ric Merry
ricmerry at gmail.com
Fri Nov 1 15:18:33 PDT 2019
tx-rate: 6.5Mbps-5MHz/2S
rx-rate: 3.2Mbps-5MHz/1S
ssid: HamWAN
bssid: 74:4D:28:57:F6:BA
radio-name: Lookout-S2/WA7DEM
signal-strength: -62dBm
signal-strength-ch0: -64dBm
signal-strength-ch1: -66dBm
tx-signal-strength: -62dBm
tx-signal-strength-ch0: -66dBm
tx-signal-strength-ch1: -64dBm
noise-floor: -124dBm
signal-to-noise: 62dB
tx-ccq: 35%
rx-ccq: 19%
authenticated-clients: 1
current-distance: 32
Mo' betta? Is current distance miles in both send and receive (round trip)?
On Fri, Nov 1, 2019 at 3:06 PM Bart Kus <me at bartk.us> wrote:
> No, you're missing an entire chain of the radio (ch1). Do this to enable
> both chains:
>
> /interface wireless set 0 rx-chains=0,1 tx-chains=0,1
>
> --Bart
>
>
> On 11/1/2019 2:55 PM, Ric Merry wrote:
>
> I climbed back up the ladder to do some fine tuning (thanks for the advice
> here)
> Luckily I could remotely view my computer with my cell phone thus saving
> me the cost of a divorce attorney had I asked my wife to help me when she
> gets home from work.
> ;)
> These are my results, I can do more but for now, how do they look?
>
> signal-strength: -66dBm
> signal-strength-ch0: -66dBm
> tx-signal-strength: -67dBm
> tx-signal-strength-ch0: -67dBm
> tx-signal-strength-ch1: -89dBm
> noise-floor: -123dBm
> signal-to-noise: 57dB
> tx-ccq: 88%
> rx-ccq: 70%
> authenticated-clients: 1
> current-distance: 32
>
> Funny things is that thee are about where I started. Elevation is the more
> difficult adjustment with the brackets provided. I may end up modifying
> those.
>
> _______________________________________________
> PSDR mailing listPSDR at hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191101/830b90af/attachment.html>
More information about the PSDR
mailing list