[HamWAN PSDR] Noise floor, alignment, et al

[Ric Merry]

I'm using web based speed test to judge my signal, they are a lot different
than what I'm seeing via the terminal.
My questions;
1. Is </interface wireless monitor 0> the best command to use when tweaking
the dish alignment?
2. With a noise floor of around -121 would I see big benefits from
purchasing the Sleeve30?
3. My ccq's sure vary throughout the day irregardless on a stable
noise floor. Why
I hope you all have a wonderful Thanksgiving, I'm grateful for all those of
you who have helped me here.
-Ric



[ric at K7ITE-Lookout] > /interface wireless monitor 0
                  status: connected-to-ess
                 channel: 5900/10/an
       wireless-protocol: nv2
                 tx-rate: 57.7Mbps-10MHz/2S/SGI
                 rx-rate: 43.3Mbps-10MHz/2S/SGI
                    ssid: HamWAN
                   bssid: 74:4D:28:57:F6:BA
              radio-name: Lookout-S2/WA7DEM
         signal-strength: -65dBm
     signal-strength-ch0: -67dBm
     signal-strength-ch1: -69dBm
      tx-signal-strength: -65dBm
  tx-signal-strength-ch0: -71dBm
  tx-signal-strength-ch1: -67dBm
             noise-floor: -121dBm
         signal-to-noise: 56dB
                  tx-ccq: 90%
                  rx-ccq: 80%
   authenticated-clients: 1
        current-distance: 31
                wds-link: no
                  bridge: no
        routeros-version: 6.45.2
                 last-ip: 172.217.3.174
       current-tx-powers:
6Mbps:27(27/30),9Mbps:27(27/30),12Mbps:27(27/30),18Mbps:27(27/30),24Mbps:27(27/30),36Mbps:27(27/30),48Mbps:25(25/28),54Mbps:24(24/27),HT20-0:27(27/30),HT20-1:27(27/30),

HT20-2:27(27/30),HT20-3:27(27/30),HT20-4:27(27/30),HT20-5:26(26/29),HT20-6:25(25/28),HT20-7:23(23/26)
     notify-external-fdb: no
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191127/86b9e512/attachment.html>