[HamWAN PSDR] One node network for testing?

[KUN LIN]

Hi Nigel
So, the process of setting up a node would be using one of the Mikrotik hardware listed and set it up in AP mode using 5.9 GHz and plug it into network?

Kun

From: Nigel Vander Houwen<mailto:nigel at nigelvh.com>
Sent: Thursday, September 5, 2019 11:26 AM
To: Puget Sound Data Ring<mailto:psdr at hamwan.org>
Subject: Re: [HamWAN PSDR] One node network for testing?

Kun,

Effectively yes, you would need to set a fixed frequency and channel width for the AP side, the clients are configured to scan over the HamWAN scan list. Then set the mode to ap-bridge instead of station.

There’s a fair bit more that goes into all the backend routing with the rest of the network, but as far as a test setup and getting something a client could connect to, it’s fairly straightforward.

Nigel


On Sep 5, 2019, at 11:14, KUN LIN <dnwk at linkun.info<mailto:dnwk at linkun.info>> wrote:

Hi
I am currently not in your coverage. However, I want to have some understanding of the system engineering. I am thinking about setting up one “provider/cell” site in my backyard. I can’t find any details on how to do that. Any information would be appreciated. For those hardware listed in “client hardware”, could they be tuned to providing service?
Thanks
Kun
_______________________________________________
PSDR mailing list
PSDR at hamwan.org<mailto:PSDR at hamwan.org>
http://mail.hamwan.net/mailman/listinfo/psdr<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.hamwan.net%2Fmailman%2Flistinfo%2Fpsdr&data=02%7C01%7C%7Cb2567f993d3945fb5a8708d7322e816c%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637033047635123568&sdata=da2OFIMaC%2BfThFQdwltoWB5M6SDVgRPS8Lev8xXjiB4%3D&reserved=0>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190905/9b16551d/attachment.html>