[HamWAN PSDR] PSDR Digest, Vol 79, Issue 11

[Rod Johnson]

The Issaquah Emcomm (ICST) could use it. ROD J

-----Original Message-----
From: psdr-request <psdr-request at hamwan.org>
To: psdr <psdr at hamwan.org>
Sent: Tue, Sep 17, 2019 12:38 PM
Subject: PSDR Digest, Vol 79, Issue 11


Send PSDR mailing list submissions to
    psdr at hamwan.org

To subscribe or unsubscribe via the World Wide Web, visit
    http://mail.hamwan.net/mailman/listinfo/psdr
or, via email, send a message with subject or body 'help' to
    psdr-request at hamwan.org

You can reach the person managing the list at
    psdr-owner at hamwan.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of PSDR digest..."


Today's Topics:

  1. MikroTik mANT30 Dish antenna free to good home (John G Parnell)
  2. Baldi Power Outage (Nigel Vander Houwen)


----------------------------------------------------------------------

Message: 1
Date: Mon, 16 Sep 2019 16:50:26 -0700
From: "John G Parnell" <jparnell at igc.org>
To: <psdr at hamwan.org>
Subject: [HamWAN PSDR] MikroTik mANT30 Dish antenna free to good home
Message-ID: <002601d56ce9$83da4fc0$8b8eef40$@igc.org>
Content-Type: text/plain; charset="utf-8"

Hello,

 

I just realized that this list is for the W WA area, so I thought I would
start here with this:

Back in July, I ordered a MikroTik mANT30 dish antenna (with precise
alignment mount)  for my HamWAN installation. It arrived with the edge of
the dish bent up AND the mount bent (!). I contacted the vendor and they
sent another one and said they would send me a UPS label for the return.
After 3 weeks, I emailed my contact and told them that if I didn't get the
shipping labels, I would give it away. 

 

Well, it has been month with not a peep from them,  so: I am offering up the
antenna for free to someone who could use it. I bent the mounting frame tabs
to fit the dish and cleaned up the edges of the dish as best I could with an
adjustable wrench as a bending lever. The dish itself has maintained it's
symmetry and I was able to bend the mounting tabs to match it, so it should
be fully functional. Just to make sure, I assembled it and it looks fine,
except for a bit of unevenness at the very edge of the dish. It is ready to
mount a MikroTik radio (I juse the MikroTik RB912UAG-5HPnd). Here is a link
to the dish's spec sheet:

https://i.mt.lv/cdn/rb_files/mANT30-140526124123.pdf   (it is the one on the
bottom)

 

I would prefer to pass this on to someone involved in Emcom activities who
will actually use it  - or someone helping someone else getting set up. Give
me a call to arrange pickup, I will not ship it. I am located in NE Seattle
in the Maple Leaf neighborhood, you can find my address in QRZ.

 

73,

John, K7HV

206 947 0545

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190916/4521d871/attachment-0001.html>

------------------------------

Message: 2
Date: Tue, 17 Sep 2019 11:41:38 -0700
From: Nigel Vander Houwen <nigel at nigelvh.com>
To: Puget Sound Data Ring <psdr at hamwan.org>
Subject: [HamWAN PSDR] Baldi Power Outage
Message-ID: <A4963CA6-B29C-442E-9C96-AEA0C9B96001 at nigelvh.com>
Content-Type: text/plain;    charset=us-ascii

Hello All,

Baldi is currently on battery power. The utility is aware of the outage. Currently the site remains at full capability.

Thanks!
Nigel

------------------------------

Subject: Digest Footer

_______________________________________________
PSDR mailing list
PSDR at hamwan.org
http://mail.hamwan.net/mailman/listinfo/psdr


------------------------------

End of PSDR Digest, Vol 79, Issue 11
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190917/23c9f92d/attachment.html>