[HamWAN PSDR] Blyn (rough) LOS plot

[Bart Kus]

Rattlesnake sector height is...I dunno, 140ft?  S1 is aimed roughly 340, 
S2 is aimed roughly 95.

Blyn S1 and S3 are 90ft.  S1 is @ 0, and S3 is roughly 260.  S2 is not 
mounted yet, and it will go lower than 90ft.  S1+S3 are not cabled yet.

--Bart


On 7/9/2020 8:13 AM, Kenny Richards wrote:
> I'll start on adding the sectors/PtP to the Cacti and smokeping this 
> weekend, so that is in place when the coverage plots are done.
>
> Thanks
> Kenny
>
> On Thu, Jul 9, 2020 at 8:07 AM Tom Hayward <tom at tomh.us 
> <mailto:tom at tomh.us>> wrote:
>
>     If you can share the sector antenna heights and azimuths for Blyn
>     and Rattlesnake, I can generate coverage plots like we have on the
>     website. Looking through the archives, all I was able to find was
>     the lat/lon and that the sectors were "rotated counter-clockwise
>     slightly".
>
>     Tom
>
>     On Tue, Jul 7, 2020 at 3:56 PM Rob Salsgiver <rob at nr3o.com
>     <mailto:rob at nr3o.com>> wrote:
>
>         Here is a wide-angle look at the starting coverage from Blyn
>         with a zoom in on the Coupeville/Oak Harbor area below.
>
>         Coupeville / Oak Harbor
>
>         If folks want to send me coordinates and names of locations I
>         can add them to the map(s).
>
>         Rob
>
>         _______________________________________________
>         PSDR mailing list
>         PSDR at hamwan.org <mailto:PSDR at hamwan.org>
>         http://mail.hamwan.net/mailman/listinfo/psdr
>
>     _______________________________________________
>     PSDR mailing list
>     PSDR at hamwan.org <mailto:PSDR at hamwan.org>
>     http://mail.hamwan.net/mailman/listinfo/psdr
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20200712/5e9a891f/attachment.html>