[HamWAN PSDR] Support needed

[Jamie Hughes]

Dylan,

Thank you.

I managed to get this completed using win box. Hopefully I'll get some time tomorrow to test with Gold

Sent from my T-Mobile 5G Device
Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: PSDR <psdr-bounces at hamwan.org> on behalf of Dylan Ambauen <dylan at ambauen.com>
Sent: Saturday, February 27, 2021 10:22:18 PM
To: Puget Sound Data Ring <psdr at hamwan.org>
Subject: Re: [HamWAN PSDR] Support needed

Hi Jamie,

Wlan1 needs to be removed from the bridge.

Do /interface bridge port print
Then remove the port listed for wlan1

Based on your previous output, it would be:

/interface bridge port
print
remove 1

Then retry step 22



/ip dhcp-client
add add-default-route=yes dhcp-options=hostname,clientid disabled=no interface=wlan1

KI7SBI

Dylan Ambauen
360-850-1200



On Sat, Feb 27, 2021, 17:11 Jamie Hughes <wa7jh at outlook.com<mailto:wa7jh at outlook.com>> wrote:
Sorry to pester,

So I am now on step 22 and I get the error listed, however, I am not sure what to do to overcome the error as described in the notes under the step.

Here are the results from running the commands as listed:

[admin at KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client> /interface bridge port print
Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload
 #     INTERFACE              BRIDGE             HW  PVID PRIORITY  PATH-COST INTERNAL-PATH-COST    HORIZON
 0     ;;; defconf
       ether1                 bridge             yes    1     0x80         10                 10       none
 1 I   ;;; defconf
       wlan1                  bridge                    1     0x80         10                 10       none
[admin at KC7Z-East_Bremerton-Gold_Mt] /ip dhcp-client>


Jamie Hughes
WA7JH
Phone: (360) 362-4575

-----Original Message-----
From: Steve - WA7PTM <psdr-list at aberle.net<mailto:psdr-list at aberle.net>>
Sent: Saturday, February 27, 2021 16:54
To: Jamie Hughes - WA7JH <wa7jh at outlook.com<mailto:wa7jh at outlook.com>>
Subject: Re: [HamWAN PSDR] Support needed

See the notes below the command.

I've seen that before, but don't recall how I solved it.  Sorry.

Steve


Jamie Hughes wrote on 2/27/21 4:49 PM:
> Well,
>
> Step 22 presents this error:
> failure: can not run on slave interface
>
>
> Jamie Hughes
> WA7JH
> Phone: (360) 362-4575
_______________________________________________
PSDR mailing list
PSDR at hamwan.org<mailto:PSDR at hamwan.org>
http://mail.hamwan.net/mailman/listinfo/psdr<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmail.hamwan.net%2Fmailman%2Flistinfo%2Fpsdr&data=04%7C01%7C%7C8fa005bff9be410d6e5108d8dbb14338%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637500901678770011%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=PQz796wVvGmsjcoJO1GaR5LJYClLgddnabbci2gxmF8%3D&reserved=0>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20210228/db79f6e1/attachment.html>