[HamWAN PSDR] Question about MikroTik client node frequency coverage

[Scott J. Burrows]

Jeff,

You will need to get the International (Non-US) version.  The sales manager at 
Streakwave knows all about HamWAN and our needs.

Scott, N7DOD





----- Original Message -----
From: Herb Weiner <herbw at wiskit.com>
Reply-To: Puget Sound Data Ring <psdr at hamwan.org>
To: Puget Sound Data Ring <psdr at hamwan.org>
Sent: 5/23/2019 4:32:08 AM
Subject: Re: [HamWAN PSDR] Question about MikroTik client node frequency 
coverage


Jeff,


You MUST get the INTERNATIONAL version of the MikroTik client node devices. 
The USA versions are factory locked out of the amateur radio frequencies and 
will NOT work with HamWAN.


Herb



On May 22, 2019, at 11:22 PM, Jeffrey Coleman <radiobug at hotmail.com> wrote:


Hi all,


Quick question: I'm looking at slides from a HamWAN demo by Scott Burrows N7DOD given at WECCWG VIII in February. In it, Scott gives the HamWAN frequency range as "ham radio microwave frequencies" from 5.65 to 5.925 GHz. Scott also lists several MikroTik client node devices. According to the MikroTik device specifications on Amazon, however, their upper frequency limit is 5.835 GHz. Is this discrepancy important? Does my client node need access to the entire frequency range as given by Scott? If so, can MikroTik client nodes be easily modified to cover 5.835 to 5.925 GHz?



Thanks,
Jeff / W7EIR
_______________________________________________
PSDR mailing list
PSDR at hamwan.org
http://mail.hamwan.net/mailman/listinfo/psdr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20190523/8e3133c3/attachment.html>