[HamWAN PSDR] optimization first results

[Scott Currie]

Hmm, so this is what I am seeing:
         signal-strength: -65dBm
     signal-strength-ch0: -88dBm
     signal-strength-ch1: -65dBm
      tx-signal-strength: -67dBm
  tx-signal-strength-ch0: -67dBm
             noise-floor: -102dBm
         signal-to-noise: 37dB
                  tx-ccq: 28%
                  rx-ccq: 28%

Why is my chan0 so different?

-Scott

On Fri, Nov 1, 2019 at 3:06 PM Bart Kus <me at bartk.us> wrote:

> No, you're missing an entire chain of the radio (ch1).  Do this to enable
> both chains:
>
> /interface wireless set 0 rx-chains=0,1 tx-chains=0,1
>
> --Bart
>
>
> On 11/1/2019 2:55 PM, Ric Merry wrote:
>
> I climbed back up the ladder to do some fine tuning (thanks for the advice
> here)
> Luckily I could remotely view my computer with my cell phone thus saving
> me the cost of a divorce attorney had I asked my wife to help me when she
> gets home from work.
> ;)
> These are my results, I can do more but for now, how do they look?
>
> signal-strength: -66dBm
>      signal-strength-ch0: -66dBm
>       tx-signal-strength: -67dBm
>   tx-signal-strength-ch0: -67dBm
>   tx-signal-strength-ch1: -89dBm
>              noise-floor: -123dBm
>          signal-to-noise: 57dB
>                   tx-ccq: 88%
>                   rx-ccq: 70%
>    authenticated-clients: 1
>         current-distance: 32
>
> Funny things is that thee are about where I started. Elevation is the more
> difficult adjustment with the brackets provided. I may end up modifying
> those.
>
> _______________________________________________
> PSDR mailing listPSDR at hamwan.orghttp://mail.hamwan.net/mailman/listinfo/psdr
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.net/mailman/listinfo/psdr
>


-- 
*-Scott*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191101/2dcb7865/attachment.html>