[HamWAN PSDR] Ok, my numbers

[Scott Currie]

So, should I be concerned about my ch0 numbers?

-Scott

[ns7c at WA7AUB-Baldi] > /interface wireless monitor 0
                  status: connected-to-ess
                 channel: 5880/5/an
       wireless-protocol: nv2
                 tx-rate: 6.5Mbps-5MHz/1S
                 rx-rate: 13Mbps-5MHz/1S
                    ssid: HamWAN
                   bssid: D4:CA:6D:7A:A3:EF
              radio-name: N7FSP/Baldi-S3
         signal-strength: -66dBm
     signal-strength-ch0: -90dBm
     signal-strength-ch1: -66dBm
      tx-signal-strength: -67dBm
  tx-signal-strength-ch0: -67dBm
             noise-floor: -101dBm
         signal-to-noise: 35dB
                  tx-ccq: 47%
                  rx-ccq: 79%
   authenticated-clients: 1
        current-distance: 31
                wds-link: no
                  bridge: no
        routeros-version: 6.41.3
-- 
Sent from my mobile device...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20191101/bed0a473/attachment.html>