[HamWAN PSDR] Best WLAN protocol for PtP link

[Kenny Richards]

Rob,

NV2 is used on all the HamWAN PtP links, with one side being the AP and the
other the client.

Thanks
Kenny

On Mon, May 8, 2023 at 10:54 PM Rob Martin via PSDR <psdr at hamwan.org> wrote:

> Hello,
>
> I'm am seeking advice, experience and expertise concerning wlan protocols
> on a Point-to-Point link.
>
> I am establishing a 20MHz-wide PtP link under Part 15 rules. Only two
> stations are involved. It is NOT Point-to-Multipoint.
>
> This link will be encrypted. Based upon some scanning of the likely
> spectrum to be used, I expect a pretty clean channel.
>
> Question: Do I use NV2, the protocol used on all HamWAN APs, or some
> 802.11 variant?
>
> If this topic is too far from general PSDR interest, please respond
> off-list.
>
> Thanks for any help.
>
> Rob
> K7QJ
>
>
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> https://mail01.fmt.hamwan.net/mailman/listinfo/psdr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail01.fmt.hamwan.net/pipermail/psdr/attachments/20230509/b2791b04/attachment.html>