[HamWAN PSDR] Best WLAN protocol for PtP link

[Kenny Richards]

I forgot to call out the exceptions, we have started using 60Ghz links in a
few situations where the distance is fairly small. In some cases those are
not Mikrotik radios and don't use NV2, but they are the exceptions.

Thanks
Kenny

On Tue, May 9, 2023 at 8:17 AM Kenny Richards <richark at gmail.com> wrote:

> Rob,
>
> NV2 is used on all the HamWAN PtP links, with one side being the AP and
> the other the client.
>
> Thanks
> Kenny
>
> On Mon, May 8, 2023 at 10:54 PM Rob Martin via PSDR <psdr at hamwan.org>
> wrote:
>
>> Hello,
>>
>> I'm am seeking advice, experience and expertise concerning wlan protocols
>> on a Point-to-Point link.
>>
>> I am establishing a 20MHz-wide PtP link under Part 15 rules. Only two
>> stations are involved. It is NOT Point-to-Multipoint.
>>
>> This link will be encrypted. Based upon some scanning of the likely
>> spectrum to be used, I expect a pretty clean channel.
>>
>> Question: Do I use NV2, the protocol used on all HamWAN APs, or some
>> 802.11 variant?
>>
>> If this topic is too far from general PSDR interest, please respond
>> off-list.
>>
>> Thanks for any help.
>>
>> Rob
>> K7QJ
>>
>>
>>
>>
>> _______________________________________________
>> PSDR mailing list
>> PSDR at hamwan.org
>> https://mail01.fmt.hamwan.net/mailman/listinfo/psdr
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail01.fmt.hamwan.net/pipermail/psdr/attachments/20230509/4cf9ca0c/attachment.html>